SLS vs MJF for nylon parts
Both build nylon parts from powder, with no support structures, and the parts come out strong and fairly even in every direction. That makes them the usual answer when FDM is not strong enough and the shape is too complex to machine.
SLS fuses the powder with a laser. MJF (HP's Multi Jet Fusion) prints a fusing agent onto the layer and heats the whole thing with lamps. In practice MJF is usually faster on a full build and gives a more uniform grey surface. SLS often has the wider choice of powders, such as flexible TPU or filled grades, and the natural off-white takes dye well.
What they share
Parts sit in 3D inside the powder, so you can stack many in one build, which is why small batches work out cheaply. Snap-fits, thin walls and moving assemblies are realistic.
How to choose
Start from the material you need, then surface and colour, then quantity. We run SLS. If a part would be better on MJF we will say so rather than force it.