3D printed jigs and fixtures for automotive work
A new production line is often held up by small things: the assembly jig that is not ready, the checking fixture that is three weeks away from the machine shop. This is where printing earns its keep.
What works well
Assembly jigs, holding fixtures, checking gauges, cable and hose guides, and covers for delicate parts. They are one-offs, the shapes are fiddly, and the design changes as the line gets proven. Printing copes with all three without extra tooling cost.
A printed jig is also light, which matters when someone lifts it hundreds of times a shift, and you can print the part number, a handle and a locating mark straight into it.
Material and design
Nylon and carbon fibre-filled nylon are the usual picks for stiffness and wear resistance. Put brass inserts where bolts go in, and add a hard wear plate where the part slides in and out, because plastic wears at the contact point first. Keep tolerances realistic: FDM typically holds ±0.2–0.5 mm, so critical locating faces may need a quick machining pass.
Know the limits
Printed jigs do not like sustained heat or very high clamping loads, and a new fixture should be checked against a master part before anyone trusts it. For anything safety-critical, test it first.